JÖST GmbH + Co. KG - Drives in motion
  • Deutsch
  • English
  • Français

Series MS

 

Tried-and-tested, reliable engineering together with ro-bust, practice-oriented designs provide high operational reliability, even under the most difficult conditions.

Technical parameters

  • Oscillating Frequencies 25/50 Hz resp. 30/60 Hz
  • 230/400V 50Hz or 440/460V 60Hz 
    via thyristor controller
  • Effective weight up to 1300 kg
  • Switch-on time 100% (operating mode S1)
  • Protection system IP 65 acc. to EN 60 529
  • Explosion proof models; ATEX II 3 DG, cCSAus

We would also be happy to provide you with further details or inform you about special models built to your specifications.

 

MS in detail

The electromagnetic vibrators generate linear oscilla-tions and are operated at oscillation frequencies of 50 and 25 Hz or at 60 and 30 Hz.

Conveying, dosing, drawing off

MS drive units are used in a variety of industries for medium duty dosing, draw-off and conveying applications. The drive units are also suitable for clock cycle operation because the maximum oscillation amplitude is reached as soon as it is started and it comes to a stop immediately after being switched off.

Infinite control

The oscillation amplitude can be infinitely controlled during the operation of all JVM electromagnetic vibra-tors. Therefore the feed rate can be easily adjusted to the current requirements.We have summarised information on the required thyristor controller at Electrical components Adapted model series MS drive units are available in seven sizes, and also in models for higher effective weights at lower oscillation amplitudes (MS 30...80). This broad range enables the optimum drive to be selected for the particular applica-tion requirements.

Maintenance-free

The use of high quality components means that JVM electromagnetic vibrators are maintenance-free and particularly easy to install. Special lifting eyes make transport easy, eliminating the need to remove the hoods.

Operational reliability

Tried-and-tested, reliable engineering together with ro-bust, practice-oriented designs provide high operational reliability, even under the most difficult conditions in central lines. All MS electromagnetic vibrators are EMV-compatible.

Flexibility

In order to allow the oscillation frequency to be altered in retrospect, the drives have been designed in such a way that they are interchangeable within a construction size in the oscillation frequencies.

We would also be happy to provide you with further de-tails or inform you about special models built to your specifications. info@j-vm.com

Exhibitions